Kid Kart Tools

Check combustion chamber volume. Tolerance +/- .01 tenth of one cc. Burette flows rapidly. Easy t…

Made from steel Perfect for the track With a quick release clamp

Check combustion chamber volume. Inserts directly into the spark plug hole. Threads made from SAE …

Used to hold the needles in place while taking off the piston from the rod Made from steel with a h…

Remove and install C-51 wrist pin Padded anvil designed to not damage the piston Comes with a "dum…

Surface ground to .310 thick. Used with CC Measuring Plug Gage (CCMP).

Used to check intake and exhaust port heights Used to check ignition timing Used to find Top Dead …

Fits most 1" and 2" dial indicators. Made from quality steel. Supplied with thumb screw.

Used to check ignition timing on C-51. Used to find Top Dead Center (T.D.C.). Used to chack igniti…

Check exhaust port height Check intake port height Made from M-2 tool steel, heat treated, and gro…

Equipped with 8 jets Sizes are: .0255, .025, .0245, .024, 0235, .023, .0225, .022 Made from alumin…

Equipped with holes for jets Marked 54, 55, 56, 57, 58 Jets not supplied

Check .475 venturi on C-51 Dellorto Equipped with aluminum handle for ease of use Marked clearly f…

Double ended .019 go (green) .026 no-go (red) +/- .0001 Handle marked clearly for identification…

Used to hold the ring while heating Finish size will not fall through cylinder Can be used to lap …

Rethread or chase spark plug holes in head Made from high speed steel

Double ended .035 no go (red) .049 no go (red) +/- .0001 Made from tool steel, heat treated, and…

Check .810 maximum exhaust port width on Comer C-51 Check .765 maximum intake port width on Comer C…

Check .655 maximum transfer port width on Comer C-51 Made from A-2 tool steel, heat treated, and gr…

Check .110 maximum width of muffler outlet Check .475 maximum length of muffler outlet +/- .0001 t…